Wall fixing stud / Horizontal stud

Wall fixing stud Horizontal stud 19 mm with ball-shaped head, in stainless steel

• NOTE! Wall fixing studs are only available as drilled!
• Placed horizontally on a wall or similar
• Pre-drill and use chemical anchor compound (see art. no. 2612058 ) to secure the position of the fixing stud.
• Thickness of the stud: 19 mm
• Drive in the stud using a special mandrel for fixed studs (see item no. 1413 ).
• When wrapped, the stud expands at the bottom with the help of a cone/wedge
• We have chosen to make the cone/wedge at the bottom of the stud extra wide, which makes driving in much easier and it is sufficient to use a rubber hammer (see item no. 23D-4 ).
• The drilled centering hole is located "on the side" of the ball at the top, see picture (if you don't want the hole, turn the stud so the hole ends up facing down.)
• Wall fixing stud material: stainless steel
• Different lengths: choose between 4 different lengths (150/250/300/350mm) in the drop-down menu
• Cone/wedge always included